Ottobock Xeno Gebrauchsanweisung Seite 123

INFORMATION
The tyres of the power wheelchair contain chemical sub-
stances that can react with other chemical substances
(such as cleaning agents, acids). Black tyres contain soot
particles that can cause discolouration and black marks.
Therefore a suitable surface is required when parking the
wheelchair for extended periods of time.
Assembly
WARNING
Risk of accidents and injuries if plug or screw connec-
tions come loose. For all setting works or for folding
down the backrest for transportation, screw and/or plug
connections have to be loosened. This can cause uncon-
trolled movements of wheelchair components. Especially
the backrest can fold to the front or rear when removing
the cotter pin (double spring cotter) from the backrest. To
avoid injuries at pinch and shear points, carry out such
works with the support of another person. Make sure to
always keep parts of the body (e. g. hands or head) out of
the danger zone.
Xeno
Downloaded from www.Manualslib.com manuals search engine
CAUTION
Risk of accidents due to unsecured screw connections.
When screw connections with thread locks are loosened,
they must be equipped with new ones or secured with a
medium-strength thread lock substance (e. g. Loc-
tite® 241).
After any settings on the power wheelchair are estab-
lished or changed, the mounting screws and / or nuts
must be retightened securely. During tightening observe
torques when specified.
CAUTION
Risk of tipping due to an incorrectly mounted anti-tip-
per. For safe operation, the anti-tipper must be installed
correctly and maintained in proper condition.
INFORMATION
Prior to using the power wheelchair, all the necessary me-
chanical adaptations (e. g. mounting special controls/
a push-button module) and software settings (e. g. pro-
gramming the control) must be made to comply with the
individual requirements and abilities of the user. Settings
may only be made by personnel that has been trained and
authorised by Ottobock.
Safety instructions
Ottobock 123
|