Fault Indication: Attendant Control - Ottobock Xeno Gebrauchsanweisung

Malfunctions/troubleshooting

8.2.2 Fault indication: attendant control

LED indicator
Red is flashing
Green is flashing
Mode LED (see fig. 34, item 4)
Red is flashing
Seat function LEDs (see fig. 34, item 5)
Backrest LED is
flashing
Seat LED is flash-
ing
2 LEDs below seat
are flashing
Backrest / seat
LED is flashing
Tab. 11 Attendant control fault notifications
196 | Ottobock
Downloaded from www.Manualslib.com
Warning/fault
Battery under voltage Battery deep discharge
Voltage too high (after full charge and
Battery over voltage
driving downhill)
More detailed information about the existing fault is shown on the LCD
Various product faults
monitor on the control panel (see chapter 8.2.1).
Back angle adjustment
motor fault
Faulty cabling or plug contacts;
Seat tilt motor fault
Defective actuator
Seat height adjustment
motor fault
Electric seat function
Overheating due to excessive load
temperature warning
manuals search engine
Cause
Charge as soon as possible
Continue driving slowly
Check cabling / plug connection;
Contact specialist dealer
Cool down phase
Possible corrective action
Xeno