Ottobock Xeno Gebrauchsanweisung Seite 186

Accessories
Controllable functions
Depending on the power wheelchair version and the assign-
ment of the push-button module, up to 5 electrical functions
can be controlled during normal driving operation (Fig. 37,
item 1), e. g.:
„ Seat tilt
„ Electric back angle adjustment
„ Stand-up function
„ Special functions (combinations) => symbols S1 – S5
The symbols used on the push-button module match the
symbols on the LCD monitor (see section 7.4.1 Separate
LCD monitor with infrared).
Push-button functions
Button "M" (= Mode, Fig. 40, item 2) is used to switch to the
different functions (1-2-3-4-5-1-2-...).
The blue LED (Fig. 37, item 3) indicates the selected func-
tion.
The arrow buttons (Fig. 37, item 4) are used to execute the
respective function (function up/down).
186 | Ottobock
Downloaded from www.Manualslib.com manuals search engine
INFORMATION
The function of the arrow buttons can be adjusted accord-
ing to user wishes (up button = up function or down func-
tion – depending on how they were programmed). Pro-
gramming must only be completed by instructed specialist
staff.
Three freely positionable Buddy buttons can be additionally
connected to the push-button module as accessories
(Fig. 37, item 5). They assume the function of the mode but-
ton and up and down buttons (Fig. 37, items 2/4). Symbols
on the back of the push-button module show the respective
function.
Xeno