Malfunctions/Troubleshooting; Warning - Ottobock Xeno Gebrauchsanweisung

Malfunctions/troubleshooting

8 Malfunctions/troubleshooting
CAUTION
Risk of accident and injury due to uncontrolled move-
ments of the power wheelchair. Uncontrolled movements
can occur during the operation of the power wheelchair as a
result of malfunction. In this case, please contact your au-
thorised dealer immediately.
INFORMATION
Should you encounter problems while troubleshooting or if
you do not manage to completely eliminate a problem by
following the measures described here, please contact
your specialist dealer.
Malfunctions are indicated on the control panel LCD dis-
play. Table 10 describes the individual displays with the cor-
responding problem sources as well as the possible causes
and measures to be taken.
If malfunctions cannot be fully corrected using the proce-
dures described here, a specialist dealer has the ability to
read the exact error code with a hand-held programming
device and to carry out a targeted system analysis.
190 | Ottobock
Downloaded from www.Manualslib.com manuals search engine
All problems that have ever occurred are saved in a list and
can be retrieved, e. g. in case of a general overhaul of the
power wheelchair. The saved data can be used to deter-
mine future service and maintenance intervals, for example.
8.1

Warning

A warning indicates a status or malfunction of one or several
components of the power wheelchair. The function of com-
ponents that have no errors is not restricted. For example, if
the connection between the controller and seat motor mal-
functions, this error will only be indicated if the user attempts
to activate the motor. However, the driving function is still
available.
Xeno