Display symbol(s)
Table 2
Battery indicator on the control panel
6.3.5 Range
INFORMATION
Information about the range of the power wheelchair can
be found in the chapter 'Technical data'.
Note that the batteries reach their full capacity only after
20 – 30 charge cycles, and the power wheelchair can
achieve the stated range only then.
Please note that the specified range was determined un-
der defined conditions in accordance with ISO 7176-4. In
practice the range can be reduced by up to 50 %.
Xeno
Downloaded from
www.Manualslib.com
Information
Battery is over voltage, with
warning symbol
Creep speed
Attendant control
manuals search engine
The following factors influence the range of a power wheel-
chair:
Battery capacity
Age of the batteries
Ambient temperature
Driving conditions (e.g. terrain profile, condition of sur-
face)
Charging method
Use of power options
Body weight of user
6.3.6 Additional electrical functions
INFORMATION
For more information on additional electrical functions,
please see section 6.6.
The other electric additional functions, such as electric back
angle adjustment, seat tilt or stand-up function, are also ac-
tivated by pressing the button "M", which must be held down
for approximately 2 seconds.
To change between the different additional functions, shortly
press the button "M" or move the joystick to the right. The
Operation
Ottobock
161
|