Ottobock Xeno Gebrauchsanweisung Seite 129

NOTICE
Damage caused by overload/excessive strain. The
power wheelchair has a maximum load capacity of
136 kg.
NOTICE
Interference from electromagnetic fields. The power
wheelchair has been tested according to EMC regula-
tions. The following particularities must be observed dur-
ing operation:
The driving characteristics of the power wheelchair can
be affected by electromagnetic fields (mobile phones or
other radiating devices).
Please switch off all mobile devices when driving.
The power wheelchair can generate electromagnetic
fields that can cause interference with other devices.
Switch off the controls whenever you do not need them.
Notwithstanding compliance with all applicable EMC di-
rectives and standards, the power wheelchair can be af-
fected by interference from other electric devices (e.g.,
department store EAS systems) or cause interference with
such devices.
If you notice such behaviour, move your power wheelchair
outside the interference range.
Xeno
Downloaded from www.Manualslib.com manuals search engine
NOTICE
Damage to tyres due to excessive tyre pressure. Make
sure that the tyre pressure indicated in section 10 "Techni-
cal data" is not exceeded.
INFORMATION
It is strongly recommended that the user for his/her own
safety always fastens the lap belt. The lap belt serves to
stabilise the person sitting or standing in the power wheel-
chair.
INFORMATION
Road traffic regulations must be observed when driving in
road traffic.
INFORMATION
Every time you switch on the control unit, it will return to
the previously selected speed level. If desired, the starting
speed level can be changed in the parameter settings.
Settings may only be made by personnel that has been
trained and authorised by Ottobock.
Safety instructions
Ottobock 129
|