Settings; Initial Operation - Ottobock Xeno Gebrauchsanweisung

9
1
7
8
Fig. 2 Main components
1 Backrest
2 Joystick and control unit
3 Armrest
4 Seat cushion
4.2

Settings

The following tools are required to adjust the wheelchair to
the requiremens of the user and for maintenance work:
„ 3 mm Allen wrench
„ 4 mm Allen wrench
„ 5 mm Allen wrench
Xeno
Downloaded from www.Manualslib.com
3 2
5 Brake release
6 Footplate
7 Motor with drive wheel
8 Anti-tipper
9 Push bar
manuals search engine
„ 6 mm Allen wrench
„ 8 mm open-end wrench
„ 10 mm open-end wrench
„ Phillips screwdriver
4
„ Screwdriver for pan head screws
5
„ Tyre repair accessories
6
4.3

Initial operation

WARNING
Risk of suffocation. Packaging materials must be kept
out of reach of children.
CAUTION
Risk of accidents and injury due to incorrect backrest
assembly. Please note that it is indispensable to mount
the cotter pin (double spring cotter) on the backrest ad-
justment mechanism after bringing the backrest in the up-
right position (see fig. 6).
Delivery and preparation for use
Ottobock
|
139