Changing Defective Lights; Front Lights; Rear Lights; Figure 56 Attaching The Rear Light To The Steering - Ottobock C1000 DS Gebrauchsanweisung

Maintenance, cleaning and disinfection
9.4

Changing defective lights

9.4.1 Front lights

INFORMATION
The front lights may only be installed and removed by au-
thorised personnel.
INFORMATION
Only the complete front light can be replaced on each
side.
An LED headlight and LED direction indicator light are at-
tached to the right and left splash guards of the drive
wheels, respectively.

9.4.2 Rear lights

INFORMATION
The rear lights can be ordered from the specialist dealer.
INFORMATION
Only the complete rear light can be replaced on each side.
216 Ottobock
|
Two LED rear lights with integrated LED direction indicator
lights are installed in the steering motor mouldings at the
rear of the power wheelchair.
To replace the rear lights, proceed as follows:
1. Loosen and remove the Allen head screw using an Al-
len wrench size 4.
Figure 56 Attaching the rear light to the steering caster fork
2. Pull the mounting plate with the rear light forward.
C1000 DS