External Mileage Counter; Mileage Counter - Ottobock Xeno Gebrauchsanweisung

Accessories
Display
Table 9 Information display on the LCD monitor

7.4.2 External mileage counter

INFORMATION
When using a separate LCD monitor, an external mileage
counter is not needed, because the LCD monitor has its
own mileage counter.
The external mileage counter is attached to the protective
bow for the control panel. The mileage counter shows:
„ Speed
184 | Ottobock
Downloaded from www.Manualslib.com
Function
Special functions
E. g. Coupled electric back
and seat tilt adjustment
Drive-away lock
manuals search engine
„ Trip mileage
„ Total mileage
„ Digital clock
Fig. 36

Mileage counter

Whenever the display shows km/h or m/h in the upper left
corner, the speedometer is activated. Pressing the yellow
button lets you see the trip mileage, total mileage, digital
clock and speed one after the other.
Setting the trip mileage back to zero
Three flashing arrows on the left side of the display indicate
the trip mileage counter. To set the value back to zero, press
the yellow key for at least two seconds.
Xeno