Operation
Fig. 29
Seat raised to the standing position
6.6.3 Electric back angle adjustment (optional)
WARNING
Risk of falling due to incorrect use of back angle ad-
justment
Drive in street traffic only with a vertical backrest.
When driving with the back angle adjustment activat-
ed, fasten the belts (lap belt, four-point belt) and do not
lean out beyond the seat surface with the seat raised.
176 | Ottobock
Downloaded from
www.Manualslib.com
manuals search engine
INFORMATION
Please also observe the safety instructions in the section
„Electric Seat Functions" > „Safety Instructions".
The backrest can be equipped with an electric back angle
adjustment option (see fig. 30). The joystick in the "seat
function" mode is used to control this function (see section
6.3.6).
In the sitting position, the backrest can be continuosuly in-
clined backwards up to 20°. In the standing position, the
back angle adjustment can be used with restrictions only.
While the seat is being raised into the standing position, the
backrest moves into the front end position.
Fig. 30
Electric back angle adjustment
Xeno