Calibration Logbook; Online Parameters; Date And Time - ECOLAB Versatronic Betriebsanleitung

PC setup program
Fig. 138: Configuration webserver
(1) "Import Web" button
(2) "Export Web" button
(3) "Delete Web" button
(4) Window showing the tree view of stored website
(5) "HTML tags" button opens a dialogue for copying the
IDs of internal data from the device memory. These IDs
are required to query the internal data from the Web
document.

12.8.13 Calibration logbook

The calibration log books of analyser sensors can be considered as an alternative to the
Ecolab PC Setup program. In the Calibration log book, data is recorded for the calibration
procedures for analysis sensors. See
on page 110.
Go to: Just Setup è Calibration logbook (double-click)
12.9

Online parameters

To set online parameters in the device online, the software directly accesses the device
memory. So the device must match the PC on which the Ecolab PC Setup program is
installed, be connected via USB or Ethernet, and a connection between the Ecolab PC
Setup program and the unit must be made.
Ä Chapter 12.7 'Connecting to the device' on page 198.
See
12.9.1

Date and time

The current date and the current time in the device from the Ecolab PC Setup program is
set out. Go to settings: Online parameters è Date and time (double-click)
417102269 Rev. 2-08.2020
(6) "Security" button opens a dialogue to configure the web
server password
Ä Chapter 10.2.1.2 'Calibration logbook'
234