Equipment Marking - Rating Plate; Life Span; Warranty; Contacts - ECOLAB Versatronic Betriebsanleitung

General information
1.10 Equipment marking – Rating plate
Refer to the section entitled "Identifying the device version" for information
on device identification and on the rating plate.
It is important for all queries to state the correct name and type. This is the
only way of ensuring that we can answer your query correctly and quickly.
1.11

Life span

Depending on properly conducted maintenance (visual inspection, functional testing,
replacement of parts, etc.), the life span is approximately 2 years.
1.12

Warranty

The manufacturer provides a warranty for operational safety, reliability and
performance under the following conditions only:
n Assembly, connection, adjustment, maintenance and repairs must be carried out by
qualified and authorised specialists with the aid of the User Manual and all the
provided documents.
n Our products are used in accordance with the instructions in the User Manual.
n Only OE spare parts must be used for repairs.
Our products are built, tested and CE certified in accordance with current
standards/guidelines. They left the factory in a safe, faultless condition.
To keep the equipment in this condition and to ensure risk-free operation,
the user must observe the instructions/warnings, maintenance regulations,
etc. contained in these operating instructions and, if applicable, affixed to
the product.
The warranty and service conditions of the manufacturer also apply.
1.13

Contacts

1.13.1

Manufacturer's contact address

Ecolab Engineering GmbH
Raiffeisenstraße 7
83313 Siegsdorf, Germany
Telephone (+49) 86 62 / 61 0
Fax (+49) 86 62 / 61 166
417102269 Rev. 2-08.2020
Email: engineering-mailbox@ecolab.com
http://www.ecolab-engineering.com
16