Edit Setup File; Display Window; Menu Bar - ECOLAB Versatronic Betriebsanleitung

PC setup program
12.5.2

Edit setup file

To create or open a setup file, go to the "File" menu.
Create new file: File è New
Open existing file: Dates è open
The workspace (SAP and display window) shows the menu structure with the respective
settings of Ecolab Versatronic '' from the Ecolab PC Setup program.
Fig. 101: Edit setup file
(1) Navigation (complete menu structure of the PC setup
program)
(2) Display window hinged surveys of sub-menus with their
configuration data
SAP
By clicking the left mouse button (just) on the "project" or a specific module, the
associated sub-items are displayed in the display window. Clicking on the icon ( "-"),
closes a menu, clicking on the symbol ( "+") brings up a menu. Double-clicking on an entry
(e.g. "hardware configuration") opens a corresponding dialogue for editing the respective
configuration data. Alternatively, you can also access the individual menu levels via the
menu "Edit".

Display window

Double-click an entry in the display window to show a settings dialogue. Click on the right
arrow icon next to the entry to show its current settings. Click on the down arrow icon to
hide these settings again.
Setup window
If several setup windows are open at a time, simply click on the name at the bottom of the
inactive window, and this becomes the active window.
12.6

Menu bar

This section describes the functions of the menu bar.
The order of the sub-section corresponds to the arrangement of the menus in the menu
bar (from left to right).
417102269 Rev. 2-08.2020
(3) Active Setup window
(4) not active Setup window
194