Threshold Monitoring - ECOLAB Versatronic Betriebsanleitung

Device menu
10.4.7

Threshold monitoring

Call Limit monitoring: Device menu è Configuration è Limit monitoring è Limit
monitoring functions 1 to 8
Configuration
point
Name
Input signal
Alarm
Binary signal for
Hold
Hold behaviour
Behaviour with
calib.
Error Handling
Alarm 1
Alarm type
Alarm / event list
Alarm text
Threshold
Hysteresis
Alarm delay on
Alarm delay off
alarm 2
Alarm type
Alarm / event list
Alarm text
Threshold
417102269 Rev. 2-08.2020
Selection /
option Explanation
Up to 15 Input name
characters of text
Select from Signal source of the analogue value, which is
analogue sector monitored by threshold monitoring
Select from Select the binary signal source to enable the limit
analogue sector switches in Hold mode
Inactive Behaviour of the limit switch in Hold mode
Active
Frozen
Inactive Behaviour of the limit switch during calibration
Active
Frozen
Normal
Inactive Behaviour of the limit switch upon occurrence of
Active a fault alarm
Frozen
Inactive Choice of alarm type
Min. alarm
Max.- alarm
alarm window
Alarm window
invert.
OFF OFF: Alarm is not displayed
Alarm Alarm: Alarm is displayed in the alarm bar of the
Event display
Event: Al. is only displayed in the event list
Up to 20 Text which is displayed when an alarm is in the
characters of text display and/or is on the event list.
-99999 to +99999 Threshold at which an alarm is triggered
(depending on the type of alarm)
0 to 99999 Distance to the threshold
Alarm on =
< Thresh. – Hyst. (With minimum alarm)
> Thresh. + Hyst. (With max. alarm)
Alarm OFF =
> Threshold (with minimum alarm)
< Threshold (with max. alarm)
0 to 999 s Time delay between occurrence of the alarm
condition and the alarm turning on
0 to 999 s Time delay between end of the alarm set to on
and the alarm turning off
Inactive Choice of alarm type
Min. alarm
Max.- alarm
alarm window
Alarm window
invert.
OFF OFF: Alarm is not displayed
Alarm Alarm: Alarm is displayed in the alarm bar of the
Event display
Event: Al. is only displayed in the event list
Up to 20 Text which is displayed when an alarm is in the
characters of text display and/or is on the event list.
-99999 to +99999 Threshold at which an alarm is triggered
(depending on the type of alarm)
164
Default
X threshold
No selection
No selection
Inactive
Normal
Inactive
Inactive
Alarm
Alarm 1
Temp.input 1
0,00
0,00
0 sec
0 sec
Inactive
Alarm
Alarm 2
Temp.input 1
0,00