Recording; Recording / Group 1/2 / Settings; Registration / Group 1/2 / Analogue Channels - ECOLAB Versatronic Betriebsanleitung

10.4.12 Recording

10.4.12.1 Recording / Group 1/2 / Settings

Go to: Device menu è Configuration è Recording è Group 1/2 è Parameter
Configuration
point
Status
Name
Diagram header
Perforation
Show binary
tracks
Memory values
Storage cycle

10.4.12.2 Registration / Group 1/2 / analogue channels

Analogue channel 1
Go to: Device menu è Configuration è Recording è Group 1/2 è analogue channels
è analogue channel 1
Configuration item
Name
Analogue channels
Line width
* Text depends on the type of cables connected to the respective channel measurement module.
Selection / option
Switched off
Display and save
(View data history and/or data
evaluation via PCA 3000, only if
the model addon, Recording, is
enabled)
Text box
Yes
No
Yes
No
Yes
No
Mean
Current Value
Minimum Value
Maximum Value
1-3600 s
Selection / option
Text box
Alias values
Channel 1 XX
Channel 1 temperature
Channel 2 XX*
Channel 2 temperature
Channel 3 XX*
Channel 3 temperature
Channel 4 XX*
Channel 4 temperature
Thin
Thick
Explanation
Switched off:
Registration image(s) are not
displayed
Display and save:
Registration image (s) is (are)
displayed, data is stored,
active
(Number of registration
images depends on the
number of occupied
channels)
Name of the group or of the
registration image
(Group 1 = registration image
1,
Group 2 = Registration image
2)
See diagram header yes / no Yes
With perforation yes / no
Show binary yes / no
Type of measured signal
processing
Time interval after which a
new reading is stored
Explanation
Identify the right recording
channel
Selects the source for the
registration of analogue
channel 1
Select the line width
171
Device menu
Default
Switched off
Group 1:
Register Ch. 1+2
Group 2:
Register Ch. 3+4
No
Yes
Average
10 s
Default
Group 1:
Channel 1 reading
Group 2:
Channel 3 reading
Group 1:
Channel 1 Group 2:
Channel 3
Thin
417102269 Rev. 2-08.2020