ECOLAB Versatronic Betriebsanleitung Seite 432

Configuration
item Selection / option
Period Out
Hourly
Every day
Weekly
Monthly
Yearly
Unlimited
Reset input Choice of binary selector
Unit l
m³
gal
Customised.
Conversion factor -99999 to +99999
(flow rate)
Customised Unit Up to 5 characters of text
Point format (flow Auto, fixed-point format
rate)
Initial display
-99999 to +99999 (
range (flow rate)
End of the display
-99999 to +99999 (
range (flow rate)
Alarms 1/2 Alarms for flow functions are designed to control the flow values with respect
to the adjustable limits.
The alarm settings of all analogue device functions have been summarized.
Ä Chapter 10.4.1.1 'Analogue signal alerts' on page 144.
See
1
( ) The entry field shows the set unit of that flow function.
( 2 ) In the input field, the set unit of the flow rate of the respective flow function is displayed.
Explanation
Only available with the flow
measurement activated:
Activation of the flow meter
This setting sets the automatic reset cycle.
In addition, the flow meter can also be in
the functional level manually or via binary
signal (reset input) resets.
The final count is stored on reset and is
available in the analogue selector as "total
period 1/2".
"Unlimited" only as "total amount":
Binary signal to reset the current count
Unit Total
Only with "custom" as the "unit":
Conversion factor of the unit "l" for the flow
rate for custom units
Only with "custom" as the "unit": free
input option of a custom unit for the flow
rate
Decimal places of the display
Upper/lower limit of the scale labelling for
2 )
reading representations such as chart
recorders and bar graphs
2
)
161
Device menu
Default
OFF
No
selection
l
+1,0000
l
XXXX.X
+ 0,0000
litres
+ 100,00
litres
Inactive
417102269 Rev. 2-08.2020