Allen-Bradley Kinetix 5500 Benutzerhandbuch Seite 232

Anhang E EC-Zertifizierungen
Catalogue number
Motor Compatibility
VPL-Axxxxx-yyyyyy
VPL-Bxxxxx-yyyyyy
Cable Compatibility
2090-CSWM1DF-
YYAALL
2090-CSBM1DF-
YYAALL
Connector Kits and Miscellaneous Accessories
2198-H040-x-x
2198-H070-x-x
1585J-M8CBJM-x
1606-XLxxx
2198-KITCON-DSL
2198-KITCON-IOSP
2198-KITCON-IOSC
2198-KITCON-PWR40
2198-KITCON-PWR70
1) Only the following motor and cable families are compatible with the Kinetix 5500 servo drives.
2) The following letters are used in the compatibility matrix to indicate model number description fields that do not
affect this DoC: x, y. These fields may be filled with any number(s) or letter(s).
3) If no series number is given, then all series are covered.
4) Legend as follows:
No = Product is not certified to this directive.
Yes = Product is certified to this directive.
N/R = this directive is not required for this product
Document Control Number: IMC-0040-D-EN
232
3
Series Description
1,2
230 Volt VP Low-inertia Servo Motor
460 Volt VP Low-inertia Servo Motor
1
Motor power/feedback cable for use with VP family
motors, YY = wire gauge, LL = length in meters
Motor power/feedback with brake cable for use with VP
family motors, YY = wire gauge, LL = length in meters
2
Input wiring connectors and DC bus T connector for
frame 1 and 2 servo drives
Input wiring connectors and DC bus T connector for
frame 3 servo drive.
Shielded Ethernet cable
24V DC Power Supply
Replacement feedback connector kit for Kinetix 5500
Replacement I/O connector kit (spring clamp) for IOD
connector
Replacement I/O connector kit (screw terminal) for IOD
connector
Replacement connector set, 40 Amp, for Kinetix 5500
Frame 1 & 2 drives
Replacement connector set, 70 Amp, for Kinetix 5500
Frame 3 drives
Rockwell Automation-Publikation 2198-UM001D-DE-P – Mai 2014
4
Directive
EMC LVD MD
Yes Yes N/R
Yes Yes N/R
N/R N/R N/R
N/R N/R N/R
N/R N/R N/R
N/R N/R N/R
N/R N/R N/R
N/R N/R N/R
N/R N/R N/R
N/R N/R N/R
N/R N/R N/R
N/R N/R N/R
N/R N/R N/R
3 / 3