Werbung
How do I Load a StaphGuard
2.1.3.
Display or Action
Use the procedure defined by facility management to put the goods in the machine.
Verify that all pockets are loaded with similar goods to about the same weight.
How do I Select a Formula?
2.1.4.
The Mark VI controller can operate in either local or Mildata mode. In local mode, the machine
does not communicate with any other devices and runs formulas contained in local controller
memory. In Mildata mode the machine downloads and runs formulas from the Mildata computer,
and frequently updates the display on the Mildata computer.
Figure 9: Selecting a Local or Remote Formula
.
Selecting a Local Formula
2.1.4.1.
Mildata network is not available, you can choose from any of the wash formulas stored in local
memory on the machine. Use the Select Local Formula screen
formula for the goods in the machine.
®
Explanation
Open the outer door.
d+l
Select a pocket to load.
!
Align the selected pocket with the outer door.
+
l
1
Open the inner door of the first pocket to load.
Close and latch the inner door.
Open the inner door of the first pocket to load.
Select Program Displays
—If the machine is not part of a Mildata network, or if the
13
Chapter 2. Normal Operation
Machine?
A.
B.
(Figure
10) to choose the correct
PELLERIN MILNOR CORPORATION
Legend
Local (Mildata not present
or enabled)
Remote (Mildata enabled)
Werbung
Kapitel
