3.1.2. Operator Signal For A Chemical - Milnor StaphGuard Betriebshandbuch

Table of Contents
2.1.4.3. Entering Mildata Batch Codes
2.1.5. Start the Selected Formula
2.1.6. What Does the Run Display Tell Me?
2.1.6.1. Formula and Step Information
2.1.6.2. Basket Rotation
2.1.6.3. Bath Temperature and Level
2.1.6.4. Formula Steps and Chemical Injection
2.1.7. Unload the Machine
2.1.7.1. For any End Code
2.1.7.2. For End Code 3 (Tumbling)
Chapter 3. Signals and Errors
3.1. Operator Intervention
3.1.1. Error with Operator Signal

3.1.2. Operator Signal for a Chemical

PELLERIN MILNOR CORPORATION
Sections
(Document BICWCT04)
142
Figures, Tables, and Supplements
Figure 13: Remote Formula Operasyonu
için Yıkama (Batch) verileri [Batch
Data for Remote Formula Operation]
Supplement 2: Chemical Injections with
the Operator Signal
Figure 14: Ekranı Çalış (Run) nasıl
okursun [How to Read the Run
Display]
Table 1: Machine Status Messages
Figure 15: Formula biterken tipik mesaj
[Typical Message when Formula
Ends]
Figure 16: Operatör sinyali ile Tipik Hata
[Typical Error with Operator Signal]
Figure 17: Çalıştır ekranında Kimyasal
enjeksiyon Görünümü [Chemical
Injection View on Run Display]