Milnor StaphGuard Betriebshandbuch Seite 108

Table of Contents
2.1.4.2. Selecting a Mildata Formula
2.1.4.3. Entering Mildata Batch Codes
2.1.5. Start the Selected Formula
2.1.6. What Does the Run Display Tell Me?
2.1.6.1. Formula and Step Information
2.1.6.2. Basket Rotation
2.1.6.3. Bath Temperature and Level
2.1.6.4. Formula Steps and Chemical Injection
2.1.7. Unload the Machine
2.1.7.1. For any End Code
2.1.7.2. For End Code 3 (Tumbling)
Chapter 3. Signals and Errors
3.1. Operator Intervention
3.1.1. Error with Operator Signal
3.1.2. Operator Signal for a Chemical
PELLERIN MILNOR CORPORATION
Sections
(Document BICWCT04)
104
Figures, Tables, and Supplements
Figure 12: Pantalla para Seleccionar
fórmula remota [Select Remote
Formula Screen]
Figure 13: Información del lote para la
operación de una fórmula remota
[Batch Data for Remote Formula
Operation]
Supplement 2: Chemical Injections with
the Operator Signal
Figure 14: ¿Cómo leer la pantalla de
Correr ? [How to Read the Run
Display]
Table 1: Machine Status Messages
Figure 15: Mensaje típico cuando la
fórmula termina [Typical Message
when Formula Ends]
Figure 16: Señal para el operador cuando
ocurre un error típico [Typical Error
with Operator Signal]
Figure 17: Vista de la inyección del
producto químico en la pantalla de
correr [Chemical Injection View on
Run Display]