Herunterladen Diese Seite drucken

For End Code 3 (Tumbling) - Milnor StaphGuard Betriebshandbuch

Werbung

Kapitola 2. Normální operace
pro koncový kód 3 (Máchání)
2.1.7.2.
Koncový kód 3 (Máchání) ti umožní otevřít
dveře a vyjmout zboží, pak zavři dveře a
dokonči máchání pro vyjmutí dalšího zboží z
koše.
Displej nebo akce
[Display or Action]
Když koš zastaví, otevři dveře a vyjmi jen
některé kusy nebo všechno zboží ze stroje.
Vyjmi požadovanou část z dávky.
PELLERIN MILNOR CORPORATION
Vysvětlení
Vypni 3-fázový obvod, signál
l
operátora, zastav jakýkoliv
pohyb koše. Toto tlačítko také
odemkne dveře a tak je můžeš
otevřít.
Otevři dveře pro vykládku.
l+d
Zavři dveře.
D+l
Dokončuje máchání bez signálu
1
operátora. Máchání pokračuje
po další dvě minuty, nebo než
zmáčkneš
— Konec BICWCO03 —

For End Code 3 (Tumbling)

code 3 (Tumbling) allows you to open the
door and remove some of the goods, then
close the door and resume tumbling to loosen
more goods from the basket.
Explanation
Remove power from the 3-
wire circuit, silence the
operator signal, and stop any
basket motion in progress.
This button also unlocks the
door so you can open it.
When the basket stops turning, open the door
and remove some or all of the goods from the
machine.
Open the door for unloading.
Remove any desired portion of the load.
Close the door.
Resumes the tumbling action
without the operator signal.
Tumbling continues for
.
another two minutes, or until
l
you press
— End of BICWCO03 —
54
—End
.
l

Werbung

loading

Diese Anleitung auch für:

42044sp242044sp360044sp260044sp372044sp2