Milnor StaphGuard Betriebshandbuch Seite 36

Table of Contents
2.1.4.3. Entering Mildata Batch Codes
2.1.5. Start the Selected Formula
2.1.6. What Does the Run Display Tell Me?
2.1.6.1. Formula and Step Information
2.1.6.2. Basket Rotation
2.1.6.3. Bath Temperature and Level
2.1.6.4. Formula Steps and Chemical Injection
2.1.7. Unload the Machine
2.1.7.1. For any End Code
2.1.7.2. For End Code 3 (Tumbling)
Chapter 3. Signals and Errors
3.1. Operator Intervention
3.1.1. Error with Operator Signal
3.1.2. Operator Signal for a Chemical
PELLERIN MILNOR CORPORATION
Sections
(Document BICWCT04)
32
Figures, Tables, and Supplements
Figure 13: Data dávky pro funkci
externího programu [Batch Data for
Remote Formula Operation]
Supplement 2: Chemical Injections with
the Operator Signal
Figure 14: Jak číst displej Běh [How to
Read the Run Display]
Table 1: Machine Status Messages
Figure 15: Typická zpráva když program
skončí [Typical Message when
Formula Ends]
Figure 16: Typická chyba v souvislosti se
signálem operátora [Typical Error
with Operator Signal]
Figure 17: Pohled na vstřik pracích
prostředků na běžícím displeji
[Chemical Injection View on Run
Display]