Herunterladen Diese Seite drucken

Basket Rotation; Bath Temperature And Level - Milnor StaphGuard Betriebshandbuch

Werbung

Table 1: Machine Status Messages
Idle
1-way Wash
2-way Wash
Soak
Pre+Final Extract
Intermediate Extract
Final Extract
Double Extract
Rotace koše
2.1.6.2.
umístěné blízko horního pravého rohu displeje,
reprezentuje relativní rychlost koše při praní,
vypouštění a rychlosti ždímání. Hned pod
grafickou rotací koše, uvádí kontrolér
požadovanou rychlost koše a to budˇ v otáčkách
za minutu (RPM), nebo v gravitačních
jednotkách (G's).
Teplota dávky a hladina
2.1.6.3.
vodních ventilů se objeví když je odpovídající
vodní ventil otevřen.
Graf Indikátor teploty dávky ukazuje přibližnou
teplotu ve stroji. Vertikální ukazatel indikátoru
je zcela červený kdy je teplota stroje na maximu
z povolené hodnoty 205 stupňů Fahrenheita (95
stupňů Celsia).
Indikátor páry a ochlazování je pod grafickým
indikátorem teploty a to v případě když jsou
instalovány na přání. "Pára" se objeví když se
otevře parní ventil, a "Ochlazování" se objeví
když je vydán povel pro ochlazování.
Graf Indikátor hladiny dávky ukazuje procentní
podíl naplnění požadované hladiny. Vertikální
ukazatel je zcela modrý, když je nastavená
hladina dosažena, a úplně bílý když ve stroji
není žádná voda.
Šipka indikátoru směru hladiny ukazuje nahoru
když aktuální hladina ve stroji stoupá (stroj se
napouští), a dolů když se vypouští. Šipka není
vidět když je hladina dosažena, nebo během
ždímání.
Kontrolér ukazuje Údaje o teplotě vody a
hladině údaje teploty a grafických indikátorů
Coasting
Waiting to Discharge
Waiting for Load
Power-up Delay
Draining to Sewer
Draining to Reuse
Timer Stopped
Please Wait xx Seconds
—Grafická rotace koše
—Indikátory

Basket Rotation

graphic near the upper right corner of the
display represents the relative basket speeds
in wash, drain, and extract speeds.
Immediately below the basket rotation
graphic, the controller displays the desired
basket speed in either revolutions per minute
(RPMs) or in gravitational units (G's).

Bath Temperature and Level

valve indicators appear when the
corresponding water valve is open.
The graphic bath temperature indicator
shows the approximate temperature in the
machine. The vertical indicator bar is solid
red when the temperature in the machine is at
the maximum allowable value of 205 degrees
Fahrenheit (95 degrees Celsius).
The steam or cooldown indicator appears
below the graphic temperature indicator
when either of these optional features is
enabled. "Steam" appears when the steam
valve is open, and "Cooldown" appears when
the cooldown output is enabled.
The graphic bath level indicator shows the
percentage of the desired level that's
achieved. The vertical indicator bar is solid
blue when the programmed level is achieved,
and solid white when there is no water in the
machine.
The level direction indicator arrow points
upward when the actual bath level in the
machine is increasing (when the machine is
filling), and points downward when the drain
opens. The arrow is not visible when level is
achieved, or during extract steps.
The controller displays bath temperature and
level data between the temperature and level
51
Kapitola 2. Normální operace
—The basket rotation
—Water
PELLERIN MILNOR CORPORATION

Werbung

loading

Diese Anleitung auch für:

42044sp242044sp360044sp260044sp372044sp2