How Do I Load A Tilting Machine; Automated (Rail Or Shuttle) Loading; Manual Loading; How Do I Select A Formula - Milnor 48040F7N Betriebshandbuch

Chapter 2. Normal Machine Operation

How do I Load a Tilting Machine?

2.1.3.

Automated (Rail or Shuttle) Loading

2.1.3.1.
Display or Action
Use the procedure defined by facility management to put the goods in the machine.

Manual Loading

2.1.3.2.
Display or Action
Use the procedure defined by facility management to put the goods in the machine.

How do I Select a Formula?

2.1.4.
The Mark VI controller can operate in either local or Mildata mode. In local mode, the machine
does not communicate with any other devices and runs formulas contained in local controller
memory. In Mildata mode the machine downloads and runs formulas from the Mildata computer,
and frequently updates the display on the Mildata computer.
PELLERIN MILNOR CORPORATION
Explanation
Open the door
d+l
Set the tilt front/rear selector switch to the front position.
U
Tilt the front of the machine up to receive the load.
k+l
Select the formula (07, for example). Details about selecting a
0 7
formula are described in
Formula?".
Toggle column for formula selection if necessary.
k
Move to the next or previous displayed formula in the current
&/^
column.
Confirm the selected formula.
u
Close the door.
D+l
Tilt the front of the machine down to the normal position.
l+l
Explanation
Open the door.
d+l
Select the formula (07, for example). Details about selecting a
0 7
formula are described in
Formula?".
Toggle column for formula selection if necessary.
k
Move to the next or previous displayed formula in the current
&/^
column.
Confirm the selected formula.
u
Close the door.
D+l
Section 2.1.4 "How do I Select a
Section 2.1.4 "How do I Select a
14