Siemens SINUMERIK 810DE Funktionsbeschreibung Seite 248

Inbetriebnahme
4.4 Inbetriebnahme der WZV für HMI Advanced
;magazine "revolver15" ($TC_MAP2) can be displayed by
;shortcut 3, you must use "<<" softkey explicitly
;to leave magazine select state.
;magazine "chain50" can be displayed by shortcut 1 and
:there is an automatic return to magazine list state after
;pressing this shortcut softkey.
;To specify softkey text, use section
"[ShortcutSoftKeysForMagSelect]"
;in language dependent ini files patm_??.ini.
;kette10 = 1, Auto<<
;revolver20 = 2, Auto<<
> ;revolver10 = 3, Auto<<
> ;kette20 = 5, NoAuto<<
> ;revolver15 = 4, NoAuto<<
>
language\patm_*.ini:
[ShortcutSoftKeysForMagSelect]
;Softkey text of magazine selection shortcut softkeys.
;Syxntax: magIdent=ShortcutSoftkeyText
;Explanation: "magIdent": magazine ident like in $TC_MAP2 or
;in magzine configuration in application
;maintenance toolmanagement.
;"ShortcutSoftkeyText": Softkey text,
;use double blank to indicate wordwrap.
;revolver10 = "1–Rev10 <<" // Soft key text
;revolver20 = "2–Rev20 <<" // Soft key text
;kette10 = "3–Kette10 <<" // Soft key text
;revolver15 = "4–Rev15" // Soft key text
;kette20 = "5–Kette20" // Soft key text
4-248
SINUMERIK 840D/840Di/810D FB Werkzeugverwaltung (FBW) – Ausgabe 11.02
 Siemens AG 2002 All Rights Reserved
11.02