Checking The Blade Feed; Assembling The Handle With Tubular Shaft; Functional Check - KLS Martin group marSeal5 plus Gebrauchsanweisung

6.11.1 Checking the Blade Feed

7 Assembling the Handle with Tubular Shaft

1 Handle
2 Tubular shaft
3 Blade trigger (red pushbutton)
4 Movable handle
• Insert the assembled tubular shaft (2) with the inserted blade holder straight into the handle (1) down
to the end stop. Close the jaw part.
7.1

Functional Check

88
Bipolar Sealing System marSeal5 plus/ - Maryland
• Tighten the knurled nut.
The blade holder in sterile packaging is secured.
• To check the blade feed, press against the rear
of the blade holder (1).
Instructions for Use
Revision 06