Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• As soon as resistance can be felt, push the button on the rotary wheel and slide the inner tube 1–2 cm
deeper into the outer tube. Then release the button.
• Align the inner and outer tubes with each other by turning them until they are felt to click into place.
The slot on the front edge of the outer tube and the bead on the movable jaw part are then in the
correct position.
• Fully open the jaw part (1).
• Slide inner tube into outer tube until they are felt and heard to click into place.
• Close the jaw part.
62
Bipolar Sealing System marSeal5 plus/ - Maryland
• Inner and outer tubes are fixated.
Instructions for Use
Revision 06
Werbung
Inhaltsverzeichnis
