Ipc Functions - Fiat TIPO Handbuch

IPC functions

The IPC module receives and manages the messages coming from the compass module and

the humidity sensor (if present) via the LIN line.
The BCM directly controls the door closing red flashing LED, located in the instrument panel.

For the versions in which the "SERVICE" menu is present:

A dedicated menu for resetting the SERVICE will be available in the IPC module
diagnosis. The "SERVICE" resetting procedure must be carried out via diagnosis
equipment.
For versions in which the pre-delivery mileage RESET function is present:

When the vehicle is new or with less than 200 km the display shows the letter "H"
before mileage. As long as mileage is below 200 km and the "H" is displayed this can
be reset, since it is considered as pre-delivery movement.
Resetting of pre-delivery mileage is carried out through diagnosis equipment in the
IPC module diagnosis.
All rights reserved. The circulation and reproduction of all or part of this guide by any means is prohibited.
FIAT TIPO -101- 0.0
REV