Can-Bh - Fiat TIPO Handbuch

CAN-BH.

The CAN-BH manages the data exchanged at medium speed between the electronic modules which
manage the passenger compartment comfort on the vehicle.
The control units interconnected by the CAN-BH are:
IPC (Instrument Panel Cluster)
RRM (Radio Receiver Module; infotelematic module VP1, VP2
AHM (Additional Heater Module)
LTM (Low Level Telematic Module)
HVAC (Heating Ventilation and Air Conditioning – Climate control module)
BCM (Body Control Module)
The CAN-BH is in the DLC multiple diagnosis connector.
The 120-ohm terminal resistors are in the BCM and the IPC module.
All rights reserved. The circulation and reproduction of all or part of this guide by any means is prohibited.
FIAT TIPO -61- 0.0
REV