Menu Activation - Fiat TIPO Handbuch

The last message displayed on the screen will be the first message shown in the Message menu item.
In case there are more than 14 stored messages, when visualizing the 14
followings, the second last dot will be white to indicate that there are others messages; when
visualizing the last message the last dot will become white. The dots wrap around together with the
messages.
The messages remain in the stored stack until condition is cleared.

Menu activation

The steering wheel button panel sends the commands to the BCM via the LIN line. The BCM
translates the controls requested by the driver and sends them via CAN to the IPC module, to access
menus and submenus.
Other display activation requests can come from other systems, to warn the driver when the
corresponding system activates.
LEFT SPOKE SWC
RIGHT SPOKE SWC
All rights reserved. The circulation and reproduction of all or part of this guide by any means is prohibited.
FIAT TIPO
UP arrow: helps to navigate in TRIP, Settings and option
screens;
TRIP button: enters TRIP ambient;
DOWN arrow: helps to navigate in TRIP, Settings and option
screens;
BACK button: exits from present ambient;
MENU/OK button (center): enters Settings menu; selects an
option.
Bottom buttons control the interaction with the VP.
SET + button: raises cruise speed up by 1 (or 5, if long pressed)
unit intervals;
RES button: resumes CC from standby;
SET - button: lowers cruise speed down by 1 (or 5, if long
pressed) unit intervals;
CANC button: sets CC in standby without erasing the set speed;
Cruise Control button (center): sets CC on/off.
Bottom buttons are disabled and covered.
-100-
th
message and the
0.0
REV