3M Attest 490H Benutzerhandbuch Seite 12

b) Results Detail page
This page provides an individual record for an incubated BI. For complete documentation,
the user may print a hard copy and/or save the record as an electronic file.
Note 1: The top four rows (highlighted in green) are populated automatically by the 3M™
Attest™ Auto‑reader 490H and cannot be changed by the user. The remaining rows are
completed by the user to satisfy the documentation requirements of their facility.
Note 2: The Results Detail page refreshes less frequently that the Status page. Until the BI
result is available, the Results Detail page displays remaining minutes of incubation in the
results field.
c) History page
The 3M™ Attest™ Auto‑reader 490H stores results for the last 100 incubated BIs on
embedded software. The 3M™ Attest™ Auto‑reader 490H Web App History page provides
a summary of these last 100 results.
d) Configuration page
This page allows the configuration of the network and language settings for the 3M™
Attest™ Auto‑reader 490H from the 3M™ Attest™ Auto‑reader 490H Web App.
10
Documenting BI Results using the 3M™ Attest™ Auto‑reader 490H
Web App
Status
History
Attest
1 2 3 4
+ – 24
1. Open the Results Detail page
After inserting a new 3M™ Attest™ BI in the 3M™ Attest™ Auto‑reader 490H, it is
a best practice to open the 3M™ Attest™ Auto‑reader 490H Web App Results Detail
page for that BI by clicking on the appropriate well number from the Status page.
2. Enter the specific information for that BI (e.g., BI Type, BI Lot #, sterilizer #, load #,
technician name, etc.) in the provided editable fields. Use the Notes section to capture
information not prescribed in the provided row titles; for example, you may wish to use
this field to record load items.
3. The entered information is saved automatically to temporary web browser storage on
the user's PC every 60 seconds, or by leaving the Results Details page.
4. Print/File Once the BI result is available, print or file the Results Detail page to create
a record. The page may be physically printed and/or saved as an electronic file.
Important! Data is only stored for the last 100 incubated BIs
Embedded software in the 3M™ Attest™ Auto‑reader 490H saves the data from the
auto‑populated (i.e., green highlighted) fields. The application relies on the temporary
storage in the user's web browser to save the data in the user‑populated fields. In
both cases, data is only stored for the last 100 records, i.e., the 101st incubated BI will
overwrite the information saved for the 1st incubated BI. To retain the Results Detail
information for future reference it is best practice to print the page or save to an electronic
file as soon as the BI result is available.
3M™ Attest™ Auto-reader
Attest
5 6 7 8 9 10
–
2017-09-16 08:31
SN
200157
Copyright © 2017 3M, Inc.
+