HP CM8060 Color MFP Kundendienst Handbuch Seite 91

6. If the service call was for an image-quality issue, do the following actions:
a. Load fresh plain non-ColorLok 8.5 x 11 or A4 paper in Tray 2 and then verify that the media
type setting is correct.
b. Load fresh plain non-ColorLok 11 x 17 or A3 paper in Tray 3 and then verify that the media
type setting is correct.
c. Print the following test pages:
●
●
●
●
HINWEIS:
using the test pages, see
7. If the service call involved a copy-quality problem, do the following actions:
a. Specify the following copy settings:
●
●
●
●
●
●
●
●
b. Make a copy of the PQ test page. Evaluate the quality of the copy.
c. Specify the following copy settings:
●
●
●
d. Make one copy of the Dimensional IQ 11 x 17 or A3 test page from the scanner platen glass
in order to verify that the scanner adjustments are correct.
e. Make one copy of the Dimensional IQ 11 x 17 or A3 test page from the ADF in simplex mode
in order to verify that the ADF adjustments are correct.
DEWW
PQ test page from Tray 2. Verify that the overall print quality is acceptable.
Nozzle Health plot with error hiding on from Tray 2. Verify that there are no missing or
misdirected nozzles. Verify that the Bonding Agent pens are working.
Pen Alignment test page. Verify that the carriage-to-carriage alignment, the pen-to-pen
alignment, and the die-to-die alignment are correct. Any misalignment must not exceed
one pixel.
Dimensional IQ 11 x 17 or A3 test page. Verify that the image placement, leading-edge
registration, image centering, image size, skew, and magnification are correct.
For help printing the test pages, see
„Image quality pages" auf Seite
Image adjustments: Normal
Color/Black: Auto
Copy Quality: Professional
Optimize Text/Picture: Auto
Color Adjustments: Normal
Color Balance: Normal
Reduce/Enlarge: Auto
Set all other options to off or default.
Color/Black: Black
Reduce/Enlarge: 100%
Set all other options to off or default.
„Print a test page" auf Seite
2320.
Service call flow
68. For help
25