HP CM8060 Color MFP Kundendienst Handbuch Seite 153

How to clean an ink or Bonding Agent spill on carpet
Follow these steps to clean an ink or Bonding Agent spill:
ACHTUNG:
1. Use absorbent material. to wipe or blot the spilled ink or bonding agent.
2. When most of the spilled substance is removed from the carpet, use mild soap and water to remove
the rest of the ink or bonding agent.
HINWEIS:
ACHTUNG:
the ink or Bonding Agent might cause or worsen a stain.
Cleaning the control panel
Clean the control panel whenever it is necessary to remove fingerprints or dust. Wipe the control panel
gently with a clean, water-dampened, lint-free cloth.
ACHTUNG:
water directly onto the touchscreen.
Resetting preventive maintenance counters
Each preventive maintenance item has an associated internal counter. It is important that the service
person resets the counter for that item every time maintenance is performed. Failure to do so will not
allow for accurate tracking and performance monitoring. See
auf Seite 45
Cleaning pick rollers
Frequent mispicks are likely the result of a dirty or worn pick roller. If the problem occurs between
scheduled maintenance intervals, try cleaning a dirty pick roller and see if that helps its performance. If
not, then replace the pick roller.
To clean a pick roller, follow these steps.
1. Remove the specific pick roller.
2. Wipe the pick roller with a water-dampened lint-free cloth.
3. Using a dry, lint-free cloth, wipe the pick roller to remove loosened dirt.
4. Allow the pick roller to dry completely before you reinstall it.
ADF Feed sensor (SN404)
Clean the ADF Feed sensor (SN404) and the surrounding area with a soft brush and puffs of air. SN404
should be cleaned regularly. Paper dust can accumulate and result in mispicks or paper jams.
„ADF Feed sensor (SN404)" auf Seite 252
Reset the preventive maintenance counter for this item every time maintenance is performed.
DEWW
Use gloves and safety glasses when handling ink parts.
Ink and Bonding Agent are water-based.
Ink and Bonding Agent might stain a surface. Vigorously wiping a carpet to remove
Use water only. Solvents or cleaners can damage the touchscreen. Do not pour or spray
for information on the use of these counters.
„Copier Diagnostic Field Tool (CDFT)"
Hardware maintenance 87