HP CM8060 Color MFP Kundendienst Handbuch Seite 158

HINWEIS:
be run in order to recalibrate the new horizontal rollers.
To clean a roller, follow these steps.
1. Remove a drive roller, as described in
2. Wipe the roller with a water-dampened lint-free cloth.
3. Using a dry, lint-free cloth, wipe the roller to remove loosened dirt.
4. Allow the roller to dry completely before you reinstall it.
Carriage felt oiler
Replace the carriage felt oiler underneath each of the Carriage PPS PCAs and the felt oiler underneath
each carriage v-bearing at the scheduled preventive maintenance interval.
VORSICHT!
„PPS-Filzöler" auf Seite 573
„Schlittenfilzöler" auf Seite 562
Reset the preventive maintenance counter for these items every time maintenance is performed.
IDO curler output transmission (belts and pulleys)
Replace the curler output transmission belts at the scheduled preventive maintenance interval.
1. Remove the IDO RM.
„Ausbaubares IDO-Modul (IDO RM)" auf Seite 404
2. Replace the IDO curler output transmission belts and pulley assemblies included with the PM kit.
92 Kapitel 4 Managing and maintenance
When the horizontal roller replacement PM item is reset, a minimum of 20 sheets need to
Do not get oil from felt on the encoder disk.
„Antriebswalzen" auf Seite 174.
DEWW