HP CM8060 Color MFP Kundendienst Handbuch Seite 156

ADF hinges
Lubricate the ADF hinges at the scheduled preventive maintenance interval.
1. Apply a small amount of grease directly to each hinge.
HINWEIS:
2. Close the ADF several times to spread the grease evenly.
Reset the preventive maintenance counter for this item every time maintenance is performed.
Tetris sensor (SN58)
Clean the Tetris sensor (SN58) at the scheduled preventive maintenance interval to remove any aerosol
buildup.
1. Access SN58.
„Tetris sensor (SN58)" auf Seite 587
2. Wipe a water-dampened swab across the cover of the sensor to clean.
ACHTUNG:
the device.
3. Wipe completely dry with a dry swab.
Reset the preventive maintenance counter for this item every time maintenance is performed.
90 Kapitel 4 Managing and maintenance
Manufacturer's specification: Molykote EM-110 grease.
Do not use any cleaner or solvent, or liquid other than water, as this can damage
DEWW