HP CM8060 Color MFP Kundendienst Handbuch Seite 217

Internal operations
This routine does the following actions:
◦
Erases all pen health data
◦
Performs some initial pen cleaning
◦
Performs a Drop Detect routine followed by Level-1 servicing
Instructions
▲ See „Engine Calibrations 1" auf Seite
Pen Cleaning routine
Purpose
This routine cleans the pen nozzles and updates the pen health database based on the Drop Detect
results.
When to run the routine
Run this routine when the pen health gauge indicators are amber or red.
Required time
4.5 to 15 minutes
Internal operation
The routine begins at Level-2 pen servicing (pen spitting, pen wiping, and pen spitting). The Level-2
pen servicing routine is followed by a Drop Detect. If more cleaning is needed, a confirmation dialog
will be displayed; the user can exit the servicing or continue a Level-3 pen servicing followed by
another Drop Detect.
Instructions
▲ See „Engine Calibrations 1" auf Seite
Drop Detect routine
Purpose
This routine determines the health of the pens and triggers routines to optimize print quality all of
the pen nozzles.
When to run
Run the routine in the following situations:
◦
You are troubleshooting the drop detect sensor assembly
◦
You are troubleshooting a pen health problem
HINWEIS:
calibration or a Pen Cleaning routine.
DEWW
A Drop Detect routine is automatically run when you perform a New Pen Servicing
58.
58.
Pen calibrations 151