HP CM8060 Color MFP Kundendienst Handbuch Seite 195

4-Bin Separator
Engine tag
number
1
2
3
4
5
6
7
8
9
DEWW
Tag description
New output assembly (C5964-67039) and stack quality fingers
(C5964-67036) provide better offset stack quality. Tags 1 and 5
should always be marked together after this upgrade.
Updated separator slide and vertical mounting brackets
(C5959-67360) have been installed in manufacturing or replaced
in the field.
Not in use.
Not in use.
This tag completes the upgrade for better offset stack quality.
New output assembly (C5964-67039) and stack quality fingers
(C5964-67036) have been installed. Tags 1 and 5 should always
be marked together after this upgrade.
Not in use.
Not in use.
This tag indicates that the finisher job separator wire harness has
been replaced and re-routed through the access hole near the
rear of the finisher.
This tag indicates that the finisher job separator wire harness has
been replaced, and installed with the plastic wire retainer in place
at SN262. (When marking Tag 9, be sure to also mark Tag 8.)
Installing the retainer with a new wire harness will extend the life
of the new job separator wire harness substantially.
Service note reference
Stack Offset Quality
NA
NA
NA
c01119634 - Stack Offset Quality
N/A
N/A
c01632188 – Service Notice
c01632188 – Service Notice
Retrofit tags 129