HP CM8060 Color MFP Kundendienst Handbuch Seite 193

HP 8050/8060 MFP retrofit tag location
The retrofit tag label is near the web wipe cover on the left side of the device.
Abbildung 4-9
Retrofit tag descriptions
●
Print engine
●
Multifunction Finisher
●
4-Bin Separator
Print engine
Engine tag
number
1
2
3
4
5
6
DEWW
Retrofit tag label locations (7 of 7)
Tag description
New duplex door cover hardware (C5957-67042) provides more
threads to eliminate the potential of over tightening the hardware.
The new carriage drive belt clamp (C5956-67468) has a notch cut
into it to eliminate the shorting to ground of the bonding agent pen
pocket PCA.
Not in use.
Dryer heater element upgrade (C5957-67092)- this issue was
resolved before most customer shipments occurred.
The new hole profile in the media guide eliminates media damage
on edge and middle of 8" by 5.5" media.
This tag eliminates the use of an acoustic foam piece on the web
wipe access panel, while increasing to 1 inch the thickness of the
acoustic foam piece applied to the CPSU board and PVR door.
Service note reference
c00965922 - Service Action Advisory
c00965921 - Service Action Advisory
NA
c00996754 - Service Bulletin
c01045073 - Service Action Advisory
NA
Retrofit tags 127