HP CM8060 Color MFP Kundendienst Handbuch Seite 155

ADF contact glass
● Clean the ADF contact glass only if dirt is visible, or if you are experiencing a decrease in copy
quality, such as streaking.
●
Clean the ADF contact glass by wiping it gently with a clean, dry, lint-free cloth. Only if necessary,
use a slightly water-dampened lint-free cloth.
●
Replace the ADF contact glass if it is scratched and the scratches cause streaks on the images.
„ADF-Kontaktglas" auf Seite 281
ACHTUNG:
surface.
ADF pick rollers
Clean the rollers in the ADF if you are experiencing misfeeds or if the originals show marks as they exit
the ADF. If cleaning the rollers does not solve the immediate problem or if it is a scheduled preventive
maintenance interval, replace the rollers.
ACHTUNG:
dust on the rollers. Cleaning the rollers frequently could introduce dust into the device.
1. Access the ADF pick rollers.
●
„Trennwalze" auf Seite 238
●
„Einzugswalze" auf Seite 240
●
„Untere Trennwalze" auf Seite 242
2. Wipe the rollers with a water-dampened, lint-free cloth. For a scheduled preventive maintenance
interval, replace the rollers.
3. Allow the pick rollers to dry completely before you reinstall them.
Reset the preventive maintenance counter for this item every time maintenance is performed.
DEWW
Do not pour or spray liquids directly onto the ADF glass. Do not press hard on the glass
Clean the rollers only if you experience misfeeds or marks on the originals, and you notice
Hardware maintenance 89