HP CM8060 Color MFP Kundendienst Handbuch Seite 120

Typical features that are disabled include subsystem tests such as running motors or solenoids, backup
of the non-volatile memory, or firmware upgrades.
Start service assist mode
To start service assist mode from the MFP control panel:
HINWEIS:
Touching the Service button when logged in as a Service User will load CDFT-E in full service mode.
1. Touch Service at the control panel Home screen.
2. Enter your access code and then touch OK.
A prompt requests whether the user is working with an authorized service person.
3. Select Yes.
If the Service button is touched when service assist mode is available but the user is not the Service
User, the Service Assist Mode log in screen is displayed.
4. Type your Service Assist Mode Access Code at the Log In screen and touch OK.
The CDFT-E application is loaded in service assist mode and takes control of the interface while the
control panel home screen is disabled and hidden. Limited CDFT-E functionality is now available.
End service assist mode
To end service assist mode, touch the X in the upper right corner of the screen.
When the CDFT-E is exited, it will close down its window and control and focus is returned to the control
panel home screen.
54 Kapitel 3 Copier Diagnostic Field Tool (CDFT)
Service assist mode is available when the user is logged in as a User or Administrator.
DEWW