HP CM8060 Color MFP Kundendienst Handbuch Seite 127

Other features on the page
●
Tray selection: Click to select the paper tray from which to feed paper for a calibration.
Scanner and ADF calibrations
You can adjust the scanner and ADF manually or automatically. Automatic adjustments are
recommended.
To access a scanner or ADF calibration screen, click Settings/Procedures, click Calibrations, and
then click the button for the calibration screen that you want.
●
Scanner image adjustments
●
Manual scanner image adjustments
●
ADF image adjustments
● Manual ADF image adjustments
For a full description of a calibration, see
Scanner image adjustments
Follow these steps to perform an automatic scanner image adjustment:
1. Click Scanner Adjustments on the Calibrations page.
HINWEIS:
Adjustments for this step.
2. Select a paper size of 11x17 or A3, as available in the paper trays. (If these sizes are not available,
use 8.5x11 or A4.)
3. Touch Print Target Page.
4. Place the printed target page on the scanner glass with the top edge of the page facing left.
5. Touch Copy Target Page.
6. Vertical Magnification adjustment
a. Measure the copied page from point A to D. If the measured value is 127 mm ± 1 mm (5.0 in
± 0.04 in), skip to the Leading Edge adjustment.
b. Touch the Vertical Magnification field to select it.
c. Using the keypad, enter the measured value.
d. Touch Enter to update the setting.
e. Touch Copy Target Page to make another copy and confirm the Vertical Magnification
adjustment.
DEWW
Depending on the firmware version, you might need to touch Automatic Scanner
„Calibrations and adjustments" auf Seite 135.
Calibrate the MFP 61