Introduction
This section introduces the two versions of the Copier Diagnostic Field Tool (CDFT) and how to start
the tool.
Overview
CDFT is a software tool used to service the MFP and accessories.
Use CDFT for the following tasks:
●
Troubleshoot the MFP and accessories
●
View the preventive maintenance item replacement schedule
●
Calibrate the MFP and accessories
●
Maintain and manage the MFP firmware
●
View and print service information
Two CDFT versions
There are two versions of CDFT:
●
CDFT-L (laptop version)
●
CDFT-E (embedded version)
CDFT-L
CDFT-L is the full-featured application that can be run on a Windows XP laptop. The embedded Web
server can be launched directly from CDFT-L.
Authentication for CDFT-L is completed by using a Remote Access Password. This dynamic password
is set in CDFT-E.
To set the password in CDFT-E, see
CDFT-E
CDFT-E runs on the MFP control panel. CDFT-E offers all of the functionality of CDFT-L, with the
following exceptions:
●
CDFT-E does not contain fault trees.
●
CDFT-E supports firmware upgrades through a USB drive.
●
The electronic version of the service manual is not accessible from CDFT-E.
Authentication for CDFT-E is completed by using a static Service Access Code that is set during the
manufacturing process.
CDFT-E has available a service assist mode. With service assist mode, the customer can log into a
restricted version of CDFT and help with remote troubleshooting. For more information, see
assist mode" auf Seite
46
Kapitel 3 Copier Diagnostic Field Tool (CDFT)
„Set the remote access password (CDFT-E only)" auf Seite
53.
71.
„Use service
DEWW