Media calibrations
●
Media Side Edge calibration
Media Side Edge calibration
Purpose
This calibration is used to locate the side edge of media on the drum.
When to run
Run this calibration when the side margins on the printed page need to be adjusted.
Required time
2 to 3 minutes
Internal operation
The Tetris sensor (SN58) locates the front side edge of paper on the drum. This value is stored in
NVM.
Instructions
ACHTUNG:
this calibration.
▲
See
„Engine Calibrations 1" auf Seite 58
DEWW
This calibration is light-sensitive. All of the MFP covers must be installed before you run
Media calibrations 139