HP CM8060 Color MFP Kundendienst Handbuch Seite 122

Manage and maintain firmware
CDFT can be used to do the following firmware maintenance tasks:
●
Manage non-volatile memory (NVM)
●
Use CDFT to perform an RFU
● Use a USB flash drive to upgrade the firmware
Manage non-volatile memory (NVM)
CDFT can be used to perform the following NVM maintenance tasks:
● Set NVM to back up automatically to the internal storage (CDFT-E)
● Manually back up NVM to an internal or external backup destination
●
Manually restore NVM from an internal or external source
For more information, see
To access the NVM maintenance options:
1. Click Settings/Procedures, and then click NVM.
2. Click the button for the backup or restore function that you want.
HINWEIS:
Use CDFT to perform an RFU
For more information about remote firmware upgrades, see
To upgrade the firmware using CDFT-L:
1. Prepare the MFP to receive the RFU file. See
2. Use a USB cable to connect the MFP and laptop.
3. Start CDFT-L. See
4. Click Settings/Procedures, and then click Firmware Upgrade.
5. Check the box indicating the upgrade mechanism (LAN or USB).
6. Click Browse, navigate to the file location, and then select the firmware file.
7. Click Upgrade.
56 Kapitel 3 Copier Diagnostic Field Tool (CDFT)
„Non-volatile memory (NVM) backup and restore" auf Seite
Enable Automatic Backup must be checked CDFT-E for automatic backup to occur.
„How to start CDFT-L" auf Seite
„Firmware upgrade " auf Seite 118
„Firmware Download" auf Seite
47.
107.
102.
DEWW