HP CM8060 Color MFP Kundendienst Handbuch Seite 141

Adjust the power setting (200-240V AC systems only)
For systems that operate using 200-240V AC, the power setting can be adjusted to better match the
installation site's available circuit breaker. The MFP default power setting is for a 12A circuit breaker.
There is a 10A optional power setting for sites that do not support a 12A circuit. Use the following
procedure to change the power setting for installation sites with a 10A circuit breaker.
1. Touch Settings/Procedures on the CDFT screen.
2. Touch Power Settings.
3. Touch 10 amp in the 200-240 VAC configuration pane.
4. Exit CDFT, and then turn the MFP power off and then on to activate the changed power setting.
DEWW Adjust the power setting (200-240V AC systems only) 75