HP CM8060 Color MFP Kundendienst Handbuch Seite 136

3. Click + or - to change the threshold value in the corresponding print mode.
4. Click Save Changes.
HINWEIS:
ink used in printing a 0.5 x 0.5 in (12.7 x 12.7 mm) square of color coverage. The maximum value
is limited to 260,000.
HINWEIS:
color quality mode (Professional or General Office).
Disabling black one pass printing
One pass printing is only used when printing black-only text documents. Disable black one pass printing
when there is smudging on these types of documents due to poor drying:
1. Click Settings/Procedures.
2. Click Print Settings.
3. Click the arrow to select Disabled.
4. Click Save Changes.
Export data
The CDFT Export Data feature provides the ability to export various types of data from the device to an
external file for offline evaluation of the data. This feature is most often used during escalation situations
based on a request from advanced technical support.
There are two types of data that can be exported from the device using CDFT: XDM machine data (an
XML file) and a zipped file of debug information.
1. Insert a USB drive into the MFP's USB slot.
2. Log into CDFT-E.
3. Touch Settings/Procedures.
4. Touch Export Data.
5. Select the data type.
6. Touch Export.
7. Touch OK on the Export Data window after the export has successfully completed.
8. Exit CDFT-E.
70 Kapitel 3 Copier Diagnostic Field Tool (CDFT)
The default threshold for Color Accent is the approximate equivalent of the amount of
The threshold for Color Accent pages should be set to the same value regardless of
DEWW