HP CM8060 Color MFP Kundendienst Handbuch Seite 194

Engine tag
number
7
8
Multifunction Finisher
Engine tag
number
1
2
3
4
5
6
7
8
9
128 Kapitel 4 Managing and maintenance
Tag description
Original PPS modules will be replaced with new ones because of
cracking. The new ones are made with a better material.
IDO media guide - There are two changes associated with this
tag:
1. Changed Sensor hole shape in 3 guides in the IDO-RM to
reduce media stabbing and bent corners of 4x6 media.
2. Move location of IDO-PI frame mounting holes downward by
0.9mm.
Tag description
New output assembly (C5964-67039) and stack quality fingers
(C5964-67036) provide better offset stack quality. Tags 1 and 5
should always be marked together after this upgrade.
Updated separator slide and vertical mounting brackets
(C5959-67360) have been installed in manufacturing or replaced
in the field.
Not in use.
The paper guide assembly (C5959-67392) within the accumulator
has been replaced
This tag completes the upgrade for better offset stack quality. New
output assembly (C5964-67039) and stack quality fingers
(C5964-67036) have been installed. Tags 1 and 5 should always
be marked together after this upgrade.
This tag indicates that the finisher input path assembly
(C5959-67376) was replaced as part of the Rev B to Rev C finisher
rework.
Replacing this part improves the performance of SN211 and
prevents the occurrence of A3.3801 error codes.
This tag indicates that the finisher accumulator (C5959-67104)
was replaced as part of the Rev B to Rev C finisher rework
Replacing this part improves the performance of the accumulator
and prevents many common accumulator motor stalls and jams.
This tag indicates that the finisher job separator wire harness has
been replaced and re-routed through the access hole near the
rear of the finisher.
This tag indicates that the finisher job separator wire harness has
been replaced, and installed with the plastic wire retainer in place
at SN262. (When marking Tag 9, be sure to also mark Tag 8.)
Installing the retainer with a new wire harness will extend the life
of the new job separator wire harness substantially.
Service note reference
c01328841 - Service Action Advisory
Pending
Service note reference
c01119634 – Stack Offset Quality
NA
NA
c01069596 - Service Action Advisory
c01119634 - Stack Offset Quality
c01388788 – Service Notice
c01388788 – Service Notice
c01632188 – Service Notice
c01632188 – Service Notice
DEWW