ADF adjustments
●
ADF Duplex Center Line Front and Back adjustments
●
ADF Vertical Magnification adjustment
●
ADF Leading Edge adjustment
●
ADF Center Line Simplex adjustment
●
ADF Scan Start Position adjustment
ADF Duplex Center Line Front and Back adjustments
Purpose
This adjustment centers the image in the horizontal direction (main scanning direction) in order to
define the correct side margins for a two-sided copy made from the ADF.
When to run
Run the adjustment when the center line of a copy regularly does not match the center line of an
original for a two-sided copy made from the ADF.
Instructions
▲
See
„ADF image adjustments" auf Seite
ADF Vertical Magnification adjustment
Purpose
This adjustment defines the correct image size in the vertical direction (sub-scanning) direction for
the ADF.
When to run
Run the adjustment when the magnification of the copy image is regularly incorrect.
Instructions
▲
See
„ADF image adjustments" auf Seite
ADF Leading Edge adjustment
Purpose
This adjustment defines the correct top margin for copies made from the ADF.
HINWEIS:
edge.
When to run
Run the adjustment when the leading edge or trailing edge of a copy regularly does not match the
leading edge or trailing edge of an original.
136 Kapitel 5 Calibrations and adjustments
Verify that the ADF vertical magnification is correct before you adjust the ADF lead
63.
63.
DEWW