HP CM8060 Color MFP Kundendienst Handbuch Seite 140

Set the scanner default media size
1. Touch Settings/Procedures.
2. Touch Paper Size Settings.
3. Touch < or > to change the Scanner Default Media Size setting to A for media sizes in inches (for
example, letter or 11 x 17 in), or A4 for metric media sizes (for example, A4 or A3).
4. Touch Commit Change to save the scanner default media size setting.
HINWEIS:
turned off, and then on.
HINWEIS:
For example, if the default media size is set to A4 (metric media sizes), the message Original size
is A4 will appear on the control panel-display even if an 8.5 X 11 inch original is placed on the
flatbed glass or in the ADF. The message Original size is A3 will appear on the control panel-
display even if an 11 X 17 inch original is placed on the flatbed glass or in the ADF.
Make sure that you set the scanner default media size to the setting that matches the media sizes
used in your country/region.
74 Kapitel 3 Copier Diagnostic Field Tool (CDFT)
The scanner default paper-size setting does not take effect until the MFP power is
This setting determines the scan area for the flatbed and ADF.
DEWW