HP CM8060 Color MFP Kundendienst Handbuch Seite 185

3. Expand the Device Lists folder and select All Devices. Locate the device in the list, and then click
to select it.
If you need to upgrade the firmware for multiple devices, select all of them by pressing the
as you click the name of each device.
4. Locate the drop-down box for Device Tools in the upper-right corner of the window. Select Update
Printer Firmware from the action list.
5. If the name of the .RFU file is not listed in the All Available Images box, click Browse in the
Upload New Firmware Image dialog box and navigate to the location of the .RFU file that you
downloaded from the Web site. If the filename is listed, select it.
6. Click Upload to move the .RFU file from your hard drive to the HP Web Jetadmin server. After the
upload is complete, the browser window refreshes.
7. Select the .RFU file from the Printer Firmware Update drop-down menu.
8. Click Update Firmware. HP Web Jetadmin sends the selected .RFU file to the device. The control
panel shows messages that indicate the progress of the upgrade. At the end of the upgrade
process, the control panel shows the Ready message.
Use FTP to upgrade the firmware
This procedure requires that the device be connected to a Windows network. Before beginning, obtain
the device network address or hostname. To find the address, on the device control panel, touch
Network Address.
1. Open an MS-DOS command prompt on your computer.
2. Type: ftp <NETWORK ADDRESS>. For example, if the network address is 192.168.0.90, type ftp
192.168.0.90.
3. Press Enter
4. When prompted for the user name, press Enter.
5. When prompted for the password, press Enter.
6. Type bin at the command prompt.
7. Press Enter. The message 200 Types set to I, Using binary mode to transfer files appears in
the command window.
8. Type put <filename> where <filename> is the name of the .RFU file that was downloaded from
the Web site, including the path. For example, type put C:\CM8060\8060FW.RFU, and then
press Enter.
HINWEIS:
quotation marks. For example, type put "C:\MY DOCUMENTS\CM8060\8060FW.RFU"
The following series of messages appears in the command window:
200 PORT command successful
150 Opening BINARY mode data connection
226 Ready
DEWW
on the keyboard.
If the file name or path includes a space, you must enclose the file name or path in
Ctrl key
Firmware upgrade 119